Aspiration and treatment plants for dusts and fumes produced in foundries, steel industry, faucets and fittings factories and mechanical industries
Biotrickling technology with shells suitable for the treatment of acid gases (400 ppm H2S) and VOC (2 grC / m3) in the industrial field (painting, foundries, food industry, etc.)
Cyclones are systems for capturing and abatement of particles with low static energy.
Cyclone dust removal technology is based on the centrifugal force which allows the heavier dust or powder particles to be forced to the outer walls of the cyclone where they coalesce and fall under gravity down the walls to the bottom of the cyclone itself.
A variant of the cyclone technology is the use of multi cyclones: multiple cyclones operating in series. In this configuration it is possible to increase the efficiency and the treatment capacity of the system.
Very often cyclone systems are used as pre-separators for large particles upstream of systems for the removal of very fine dust which pass’s through the cyclone Cyclones are also suitable as they can be used for the removal of high density fine dust particles.
Dry cyclones can also be used for the recovery of raw materials in industrial applications such as chalk dust, or for the separation of food powder, upstream of systems suitable for the collection of very fine dust The cyclones can be used as roughing systems in all the cases in which there is a mass flow of considerable dust, and when you want to reduce the load and protect the downstream air filtering systems.