Air Clean studies each single problems and provides the best solution taken from a wide range of highly efficient technologies.

用洗涤器及最后一代生物滤池来消除在玻璃 钢生产工艺过程中所释放的苯乙烯

The fiberglass processing often involves the use of a large amount of solvent. The principal compound is styrene.

The traditional method of treatment is activated carbon which involves high running costs.

Air Clean has made some successful applications for the removal of styrene based on the use of organic media biofilter’s which require very little maintenance.


用洗涤器及生物滴滤池来消除在塑料加工过 程中所排放的甲与VOC

One of polluting compounds that are released during the processing of plastics is made from formaldehyde.

This compound is considered to be a suspected carcinogen and must be removed from the air.

Air Clean realized some installations for the removal of formaldehyde using multi stage MónaShell® biotrickling technology.



The plastic industry often involves hot processes which release vapors that must be captured and properly treated.

Air Clean has built several plants in this area, based primarily on the use of wet scrubbing systems.


通过化学生物处理系统来消除造纸工业排放 的硫化氢及硫化合物

One of the problems related to the paper industry is the release of gases containing high concentrations of hydrogen sulphide and other reduced sulfur compounds.

The treatment of these chemical compounds may be made using activated carbon and chemical scrubbers when concentrations are low. For higher concentrations biological systems of conventional type and advanced type multi stage biotrickling filters can be used.


消除制药工业与化妆品工业排放的危害性粉 尘及异味(包括洁净室用高效过滤器)

The pharmaceutical industry often requires guaranteed extreme purity for clean rooms.

Another problem is created by the possibility of emissions of polluting compounds from industrial process’s into the atmosphere.

Air Clean has developed numerous clean room applications in the pharmaceutical industry for both the internal environmental conditions and for the treatment of the emissions produced during industrial processes.



The production of printed circuit boards often involves the milling of the support crate metals. These metals can be dusty and must therefore be picked up and transferred by ventilation pipework to a high-speed air passage inside of dry filters for the collection and separation of dust.

Air Clean has extensive experience in this application and especially in the treatment of aluminum powders which have the added issue of being hazardous.


The production of fertilizers both of organic and inorganic origin often involves the development of malodorous substances.

Air Clean has built several plants in this area is by using biological techniques or by using conventional techniques.

Removal and recovery of chips in the wood manufacturing industry

During processing and woodwork fabrication release of timber particulates and dust are considered a occupational hazard and a source of environmental pollution. Hard wood formulas are considered a carcinogen, as well as an air pollutant.

Air Clean designs, manufactures and installs systems for capturing the wood particulates which can be captured and the air recirculated into the production process.